Continuous Level Measurement for High Pressure Applications
The R-HPR pulse radar sensor from ABM is the ideal solution for liquid, slurry or solid level applications in high pressure processes with vapours, gases (CO2, CO, H2S, H2), foaming or volatile surfaces. The sensor is designed with a high pressure Teflon rod antenna that can handle up to 70 bar (1015 psi).
The non-contact radar sensor provides continuous level measurement up to 100 ft (30.5 m) with 4-20 mA output standard and simple push-button calibration. The sensor can be factory configured for a variety of applications with 3-wire / 4-wire (RS232 or RS485) power and communication options, remote monitoring with the optional Cellular Gateway and multiple range options.
Industries
Applications
- Process tank level and control
- Inventory level in storage tanks
High Performance, Maintenance Free Radar Sensor.
- Self-adjusting sensor, automatically eliminates false echoes without user involvement
- High resolution with short transmitted pulses ensures accuracy
- Very narrow radiation beam enables installation close to tank walls
- No influence from mounting, walls or internal obstructions on sensors performance
- No influence from temperature, pressure or humidity on measurement
- Teflon rod antenna resists material and moisture build-up
- Non-contact and self-cleaning nature provides maintenance free operation
Technology Advantage
ABM’s smart, self-adjusting radar sensors continually monitor conditions in the environment and automatically adjust the transmitted energy and sensitivity to match the current tank conditions. This technique allows the receiver to detect only one echo from the measured media while all false echoes are pushed under the noise level and eliminated. The self-adjusting technique also gives the same amplitude of wanted echoes regardless of distance to the target. With one echo only, signal processing is very simple and the certainty of the measured echo being the target is 100%. This makes the ABM sensors very accurate and reliable.
Very narrow transmit pulses enable liquid interface detection, such as oil-water interface. The radar sensor has a very fast response, up to 20 updates per second, enabling control for fast moving applications (i.e. vehicles, boats, etc.). Very high dynamics enables detection of very low dielectric constant liquids (>2).
Operation is plug-and-play with ABM sensors. The self-adjusting nature means there is no need for mapping or profiling the environment or downloading several parameters. These signal process operations commonly used by other brands reduce the certainty in the measured materials level. ABM sensors are smart and automatically adapt without user involvement.
Technology: Pulse radar
Measuring Range: Up to 100 ft (30.5 m)
Accuracy: +/- 0.10 % of maximum range (in lab using 4-20 mA current output). +/- 0.25 % of maximum range (typical in field)
Frequency: 6.3 GHz or 5.8 GHz (outside North America)
Calibration: Push-button or programmable via communications port
Output: 4-20 mA output 6.1 uA resolution
Power Options: 12-30 VDC (3-wire), 115 VAC (4-wire) or 230 VAC (4-wire)
Communication Options: RS232, RS485 or Cellular Modem
Ambient Temperature: -40 to 60°C (-40 to 140°F)
Installation Category: Class II
Enclosure: Aluminum standard. SS316L optional
Protection Rating: IP68 (NEMA 6)
Antenna: High pressure Teflon rod
Process Connection: 2″ NPT
Process Temperature: -40°C to 177°C (-40°F to 350°F)
Process Pressure: ≤ 70 Bar (1015 psi)
Range Code | Range | Resolution | Mounting |
017 | * - 17 ft / 5.2 m | 0.08" / 2.0 mm | 2" NPT |
033 | * - 33 ft / 10.1 m | 0.15" / 3.9 mm | 2" NPT |
050 | * - 50 ft / 15.2 m | 0.22" / 5.7 mm | 2" NPT |
100 | * - 100 ft / 30.5 m | 0.44" / 11.4 mm | 2" NPT |
* Minimum range starts at the lower tip of the antenna for high dielectric material (water). For low dielectric materials allow longer minimum range.